Static Hazards:

1. The PET material has adsorption phenomenon, which causes the machine to run an alarm. Printing cannot be continued normally and needs to be stopped for finishing.

2. When the PET material passes through the conveyor belt during operation, it cannot be conveyed smoothly.

3. When PET is printed, due to excessive static electricity, the material has dust adsorbed on the surface of the product, which affects the quality of the product.

4. After the PET is printed, the finishing area causes the products to be unorganized, and the more products there are, the more uneven layers appear and it is not easy to organize

solution:

1. In the process of the product passing through the conveyor belt, a static-eliminating ion fan is installed to effectively eliminate the static electricity generated by friction when the product passes through the insulating conveyor belt, so as to reduce the static electricity value on the product.

2. A static-eliminating ion fan is installed when the product is printed and sorted. After the product is printed, it will generate a large amount of static electricity again due to the frictional inertia of the conveying, which is also the main reason for the uneven sorting of the product. The installation of a static-eliminating ion fan on the top of the product can effectively eliminate the static electricity on the surface of the product and the fine dust adsorbed by the product due to static electricity. Reduce defective rate and improve production efficiency.